Release 8.0.4
A58312-01
 Library |
 Product |
 Contents |
 Index |
| Oracle8 Error Messages Release 8.0.4 A58312-01 |
|
Cause: VMS system service $CANTIM returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $DEQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $ENQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $SETIMR returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $HIBER returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $ENQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $DEQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: A global locking system service returned an unexpected value.
Action: Look for system error message (if any), and refer to VMS documentation, or contact Oracle Support.
Cause: VMS system service $DEQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $DEQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $GETLKI returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $ENQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $ENQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $DEQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $DEQ returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: VMS system service $GETLKI returned an unexpected value.
Action: Look for system error message, and refer to VMS documentation.
Cause: Too many test files open. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $OPEN failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $OPEN failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $CLOSE failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GET failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $IDTOASC failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: An extension was found, but it is of improper length. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $PARSE failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: A wildcard was used in the file name.
Action: Reenter the file name completely.
Cause: VMS system service $SEARCH failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $OPEN failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $CLOSE failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $IDTOASC failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $FIND_HELD failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: An OS role name was too long.
Action: Re-define the role name to be of correct length.
Cause: VMS system service LIB$SPAWN failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETUAI failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: An attempt was made to set an INTERNAL password (for either DBA or OPER privilege), but the corresponding VMS account (either ORA__DBA or ORA__OPER) hasn't been created yet.
Action: Add a VMS account for ORA__DBA and/or ORA__OPER before trying to set a password for them.
Cause: VMS system service $FIND_HELD failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $PARSE failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: A background process did not have name of correct form.
Action: If the job name was changed, restore it. Otherwise, this is an internal error. Contact Oracle Support.
Cause: The ORA_SID must exist and be less than 6 characters.
Action: Consult the VMS Installation Guide for information on setting the SID.
Cause: A logical name used to set a detached process quota value has an invalid value (probably non-numeric).
Action: Examine the values of these logical names. Correct the one in error and retry.
Cause: VMS system service $PARSE failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $SEARCH failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $CREPRC failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: The logical name ORA_SID doesn't translate to a valid value.
Action: Examine the value of ORA_SID in the process that gets the error, and correct the installation or command procedures that caused ORA_SID to be set incorrectly.
Cause: VMS system service $DELPRC failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: While obtaining needed privileges, an error was returned from SYS$SETPRV. This is an internal error.
Action: Contact Oracle Support.
Cause: While releasing privileges, an error was returned from SYS$SETPRV. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $SCHDWK failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETSYIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $ASCTOID failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $CHKPRO failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $SNDOPR failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETUAI failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $HASH_PASSWORD failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETUAI failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $GETJPIW failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $CHANGE_CLASS failed.
Action: Examine system error message, and refer to SEVMS documentation.
Cause: VMS system service $CHANGE_CLASSS failed.
Action: Examine system error message, and refer to SEVMS documentation.
Cause: VMS system service $CHANGE_CLASS failed.
Action: Examine system error message, and refer to SEVMS documentation.
Cause: VMS system service $FORMAT_CLASS failed because the given binary classification was not valid.
Action: Examine system error message, and refer to SEVMS documentation.
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of a secrecy level.
Action: Define the entry in the rights database which the binary label specified references.
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of an integrity level.
Action: Define the entry in the rights database which the binary label specified references.
Cause: An illegal database block size was specified in the parameter file. It must be positive, a multiple of 512, and less than the maximum physical I/O data size.
Action: Change db_block_size in the parameter file to conform to these limits.
Cause: An illegal redo log buffer size was specified in the parameter file. It must be positive and a multiple of 512.
Action: Change log_buffer in the parameter file to conform to these limits.
Cause: While creating the system global area (SGA) backing file, VMS system service $CREATE failed.
Action: Examine the system error message, and refer to VMS documentation.
Cause: While creating the system global area (SGA), VMS system service $CRMPSC failed.
Action: Examine the system error message, and refer to VMS documentation.
Cause: While deleting the system global area (SGA), VMS system service $DGBLSC failed.
Action: Examine the system error message, and refer to VMS documentation.
Cause: While mapping the system global area (SGA) during logon, VMS system service $MGBLSC failed. Probably, oracle has not been started up.
Action: Examine the system error message, and refer to VMS documentation. Start up oracle if it is not already started.
Cause: An attempt to map the SGA during logon failed, because it was already mapped. This is an internal error.
Action: Exit program and try again. Contact Oracle Support.
Cause: While unmapping the system global area (SGA) during logoff, VMS system service $CRETVA failed.
Action: Examine the system error message, and refer to VMS documentation.
Cause: An attempt to unmap the SGA during logoff failed, because it was not mapped. This is an internal error.
Action: Exit program and try again. Contact Oracle Support.
Cause: While extending the program global area (PGA), VMS system service $EXPREG failed. This often happens when the virtual memory page count quota is exceeded.
Action: Examine the system error message, and refer to VMS documentation.
Cause: While deleting the program global area (PGA) during logoff, VMS system service $DELTVA failed.
Action: Examine the system error message, and refer to VMS documentation.
Cause: While creating or extending a context area, VMS system service $EXPREG failed. This often happens when the virtual memory page count quota is exceeded.
Action: Examine the system error message, and refer to VMS documentation.
Cause: While deleting a context area, VMS system service $DELTVA failed.
Action: Examine the system error message, and refer to VMS documentation.
Cause: The buffer debug function was called with an illegal value. This is an internal error.
Action: Contact Oracle Support.
Cause: While attempting to set protection in the database buffer debug mechanism, VMS system service $CRETVA failed.
Action: Contact Oracle Support.
Cause: While attempting to set protection in the database buffer debug mechanism, VMS system service $SETPRT failed.
Action: Contact Oracle Support.
Cause: While attempting to set protection in the database buffer debug mechanism, VMS system service $MGBLSC failed.
Action: Contact Oracle Support.
Cause: An attempt was made to change the buffer protect mode, when the SGA was not created with buffer protect debug option. This is an internal error.
Action: Contact Oracle Support.
Cause: An attempt was made to map an SGA with software in which the SGA pad area isn't large enough.
Action: Create a smaller SGA, or relink the software with a larger pad.
Cause: An attempt was made to create an SGA with software where the SGA pad area isn't large enough.
Action: Create a smaller SGA, or relink the software with a larger pad.
Cause: An attempt was made to map to the SGA while it was being initialized.
Action: Wait until initialization is complete, and try again.
Cause: The system global area (SGA) backing file failed to allocate using the system pagefile, because the system-wide limit on global pages has been exceeded.
Action: Either increase the VMS system parameter GBLPAGFIL, or use a disk file as the SGA backing file.
Cause: While attempting to set the protection of a region of memory, an error was returned from the $CMKRNL system service.
Action: Examine the system error message, and refer to VMS documentation.
Cause: This is an internal error.
Action: Report this error to Oracle Support; provide the init.ora file.
Cause: While attempting to set the label on a file, SEVMS service $CHANGE_CLASS failed.
Action: Examine the system message, and refer to SEVMS system documentation.
Cause: While attempting to create a file, VMS system service $CREATE failed.
Action: Examine the system message, and refer to VMS system documentation.
Cause: While attempting to reopen a file, VMS system service $OPEN failed.
Action: Examine the system message, and refer to VMS system documentation.
Cause: While attempting to get the user's terminal device name, user name, user program name, or process name during logon, VMS system service $GETJPIW failed.
Action: Examine the system message, and refer to VMS documentation.
Cause: While attempting to translate SYS$INPUT during a prompt for a password, VMS system service $TRNLOG failed.
Action: Examine the system message, and refer to VMS documentation.
Cause: While attempting to get device characteristics during a prompt for a password, VMS system service $GETDVI failed.
Action: Examine the system message, and refer to VMS documentation.
Cause: While prompting for a password, VMS system service $ASSIGN failed.
Action: Examine the system message, and refer to VMS documentation.
Cause: While prompting for a password, VMS system service $QIOW failed.
Action: Examine the system message, and refer to VMS documentation.
Cause: A VMS exception occurred while executing in the oracle exception handler. The message includes the signal number, first and second signal arguments, and exception PC, PSL and R0. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of a secrecy category.
Action: Define the entry in the rights database which the binary label specified references.
Cause: VMS system service $IDTOASC failed while looking up the string representation in the rights database of an integrity category.
Action: Define the entry in the rights database which the binary label specified references.
Cause: SEVMS system service $PARSE_CLASS failed because the given string did not represent a valid classification.
Action: Examine system error message, and refer to SEVMS documentation.
Cause: A call to the oracle shared image entry point occurred from within the shared image. This is an internal error.
Action: Contact Oracle Support.
Cause: While attempting to set up the dispatch vectors for the shared image, an error occurred. This is an internal error.
Action: Contact Oracle Support.
Cause: During oracle shared image entry, a dispatch to kernel mode failed.
Action: Verify that the shared image is installed with the CMKRNL privilege, then contact Oracle Support.
Cause: During an attempt to restore user privileges at oracle shared image exit, VMS system service $SETPRV failed. This is an internal error.
Action: Contact Oracle Support.
Cause: During an attempt to restore the supervisor-mode stack at oracle shared image exit, VMS system service $SETSTK failed. This is an internal error.
Action: Contact Oracle Support.
Cause: During an attempt to set the oracle supervisor-mode stack at oracle shared image entry, VMS system service $SETSTK failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An interrupt was received while archiving the logs.
Action: Retry operation.
Cause: Overflow of buffer for parsing archive control text string. This is an internal error.
Action: Contact Oracle Support.
Cause: Unrecognized device type in archive text. This is an internal error.
Action: Contact Oracle Support.
Cause: The archive control text in the ARCHIVE command is invalid. The device type (to indicate a file or tape) must be followed by a '/'.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.
Cause: The archive control text in the ARCHIVE command is invalid. The device name must be followed by a ':'.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.
Cause: The buffer supplied for the device name is too small. This is an internal error.
Action: Contact Oracle Support.
Cause: The archive control text in the ARCHIVE command is invalid. The disk file name is missing.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.
Cause: The archive control text in the ARCHIVE command is invalid. The tape label name is missing.
Action: Refer to the SQLDBA Guide for the proper syntax of the text.
Cause: The buffer supplied for the tape label is too small. This is an internal error.
Action: Contact Oracle Support.
Cause: The user specified a remote disk for archiving via DECnet.
Action: Archive to a disk on the local host.
Cause: The buffer supplied for the file name is too small. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service SYS$MOUNT failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service SYS$DISMNT failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service SYS$GETDVI failed.
Action: Specify a valid device in ARCHIVE control string.
Cause: VMS system service LIB$GET_VM failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service LIB$FREE_VM failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: A call to sys$enq returned an error indicating that the operating system lacked the resources necessary to create a lock. This is caused by the messages SS$_EXENQLM or SS$_INSFMEM.
Action: Free up some of the required resource to allow the creation of the required lock.
Cause: Structures used for reading error message files do not match. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $OPEN failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: VMS system service $CONNECT failed.
Action: Examine system error message, and refer to VMS documentation.
Cause: An error message file has incorrect format.
Action: Unless an error file has been changed, contact Oracle Support.
Cause: Seal in passed in handle does not match correct value. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $CLOSE failed.
Action: Examine system error, and refer to VMS documentation.
Cause: Seal in passed in handle does not match correct value. This is an internal error.
Action: Contact Oracle Support.
Cause: VMS system service $READ failed.
Action: Examine system error, and refer to VMS documentation.
Cause: An attempt to create a message file failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An attempt to allocate a cache for a newly-created message file failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An attempt to seek before writing a message file cache element failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An attempt to write a message file cache element failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An attempt to seek before reading a message file cache element failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An attempt to read a message file cache element failed. This is an internal error.
Action: Contact Oracle Support.
Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
Action: Contact Oracle Support.
Cause: The seal in a passed-in handle does not match correct value. This is an internal error.
Action: Contact Oracle Support.
Cause: The destination string provided to the function is too short. This is an internal error.
Action: Contact Oracle Support.
Cause: the $open service failed. This is an internal error.
Action: Contact Oracle Support.
Cause: An impossible request for binary to decimal conversion was made.
Action: This conversion cannot be performed.
Cause: An impossible request for binary to decimal conversion was made.
Action: This conversion cannot be performed.
Cause: An impossible request for binary to decimal conversion was made.
Action: This conversion cannot be performed.
Cause: An impossible request for decimal to binary conversion was made.
Action: This conversion cannot be performed.
Cause: An impossible request for decimal to binary conversion was made.
Action: This conversion cannot be performed.
Cause: An error was returned from the SYS$CRELNM function.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from the SYS$DELLNM function.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from the SYS$CREMBX function while trying to create the process dump mailbox.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from $QIO while trying to queue a read to the process dump mailbox.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from SYS$SETIMR while trying to queue a process spin-watch timer.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from SYS$QIO while trying to read the process dump mailbox.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from SYS$GETDVIW while trying to get information about the process dump mailbox.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for an I/O vector.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from SYS$OPEN while attempting to open the data file for reading.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from SYS$CLOSE while attempting to close the input data file.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from LIB$FREE_VM while attempting to free the memory for the I/O vector.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from LIB$GET_VM while attempting to allocate memory for data and index buffers.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned from LIB$FREE_VM while attempting to free memory used by data and index buffers.
Action: Examine system error, and refer to VMS documentation.
Cause: The longest record in the file will not fit into the largest data buffer that can be allocated.
Action: Modify the RMS file to have smaller records.
Cause: An error was returned by SYS$CONNECT while attempting to open the data file.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned by SYS$GET while attempting to read the data file.
Action: Examine system error, and refer to VMS documentation.
Cause: An error was returned by SYS$GET while attempting to skip records in the input file.
Action: Examine system error, and refer to VMS documentation.
Cause: A bad option to loader Fixed= is one legal option.
Action: Examine documentation.
Cause: An error occurred while setting up the control interrupt handler. This is an internal error.
Action: Contact Oracle Support.
Cause: A list of all files open by this process failed to be obtained. This is an internal error.
Action: Contact Oracle Support.
